Mini R56 John Cooper Works (N14) Tuning Stage 1: 211 -> 235 PS
The Tuning Stage 1 is a pure software solution to increase power and torque of the Mini R56 John Cooper Works.
Central point of interest was, to reach a homogeneous inflating of the power without disturbing torque peaks - much strength with maximum driveability was, what we were looking for. You can be sure, that we have found it.
The programming of the electronic accelerotor pedal (e-gas) was arranged clearly more sportly, without adding any "nervousity" to the car.
Maximum Power is raised from 211 to 235 PS, maximum torque from 260 to 330 Nm.
Rev. Limiter is raised to 7000 1/min
The usage of high octane fuel (98 octane or better) is strictly recommended for Stage 1 tuned cars!
The Stage 1 software is programmed directly into the ECU via the car's diagnostic plug. The ECU must not be removed or opened for programming. Tuning-dates can be agreed upon at any time at short notice by telephone.
Power tests on our dyno-bench are optional on request at additonal charge.
If it's impossible for you to bring your car to us, you can send us your ECU for programming as well.
Mini John Cooper Works R55 / R56 / R57 series with N14 Engine (My -> 2012).
***TÜV entry for legal road use possible (german cars only) ***