Tuning Stage 1 for Speedster Turbo: 235PS / 390Nm

The Tuning Stage 1 is a pure software solution to increase power and torque of the OPEL Speedster turbo. Central point of interest was, to reach a homogeneous inflating of the power without disturbing torque peaks - much strength with maximum driveability was, what we were looking for. You can be sure, that we have found it.
The programming of the electronic accelerotor pedal (e-gas) was arranged clearly more sportly, damping of the butterfly valve (which partly is responsible for the frequently criticized "power-push after accelerator-release") is reduced.

Maximum Power is raised from 200 to 235 PS, maximum torque from 250 to 390 Nm.
Rev. Limiter is raised to 7000 1/min

The usage of high octane fuel (98 octane or better) is strictly recommended for Stage 1 tuned cars!

The Stage 1 software is programmed directly into the ECU via the car's diagnostic plug. The ECU must not be removed or opened for programming. Tuning-dates can be agreed upon at any time at short notice by telephone.
Power tests on our dyno-bench are optional on request at additonal charge.

If it's impossible for you to bring your car to us, you can send us your ECU for programming as well.


***TÜV entry for legal road use possible (german cars only) ***